CON1
53261-1471
LED Driver / Day / NVIS
ACI-2316
ACI-2316 · LED Driver
Manufacturer: Applied Concepts
The ACI-2316 provides a single board LED Driver solution for the powering of a LED backlight consisting of two types of LEDs, High Bright "Day" LEDs, and IR filtered "NVIS" LEDs. This driver operates as a Dual Mode constant current LED Driver. In "Day" mode, the driver supplies power out of the Day channel (CON3, pins 1 and 5), and in the "NVIS" mode, out of the NVIS channel (CON3, pins 1 and 3). Mode selection is accomplished via a signal provided by the user on pin 11 of CON1.
Mechanical envelope
ACI-2316
3.25 × 2 × 0.47 in
Weight: 35.7 g
Envelope illustration · not a PCB drawingThe specifications that matter.
The ACI-2316 provides a single board LED Driver solution for the powering of a LED backlight consisting of two types of LEDs, High Bright "Day" LEDs, and IR filtered "NVIS" LEDs. This driver operates as a Dual Mode constant current LED Driver. In "Day" mode, the driver supplies power out of the Day channel (CON3, pins 1 and 5), and in the "NVIS" mode, out of the NVIS channel (CON3, pins 1 and 3). Mode selection is accomplished via a signal provided by the user on pin 11 of CON1.
Values and conditions from published product data. Refer to the datasheet for integration details.
Input voltage
9–18 Vdc (typ. 12 Vdc)Power
≤ 25 W; 18 WEfficiency
87 %Weight
35.7 g| Characteristic | Mode | Value / limits | Conditions / source |
|---|---|---|---|
| Maximum Input Voltage (Vin Max) | Common | -0.7–20 Vdc (typ. 12 Vdc) | Not specified |
| Altitude | Common | 35000 ft | Not specified |
| Configuration | Common | Series | Not specified |
| Connector CON1 Part No | Common | 53261-1471 | Not specified |
| Connector CON2 Part No | Common | 53261-0671 | Not specified |
| Controller Type | Common | DV | Not specified |
| Efficiency | Common | 87 % | Not specified |
| Enable | Common | active high Vdc | Not specified |
| LED Forward Voltage | Common | 36–120 Vdc | Not specified |
| Humidity | Common | 95 % | Not specified |
| Input Cables | Common | 27-R0149, | Not specified |
| Input Current Draw Disabled (lind) | Common | 8 Adc typ. | Typical value from original catalog; zero placeholders for limits omitted. See source data for details. |
| Pin Input Max | Common | ≤ 25 W | Not specified |
| Pin Input Design | Common | 18 W | Not specified |
| Rec. Input Voltage (Vin) | Common | 9–18 Vdc (typ. 12 Vdc) | Not specified |
| Kits | Common | ACK-2270, | Not specified |
| LED Intensity Control Voltage (Icntl) | Common | 0.1–4.6 Vdc | Not specified |
| Mounting Holes | Common | 0.128 ( X 2 ) | Not specified |
| Nominal Output Current Adjust (Iadj) | Common | 0–150 mAdc (typ. 0 mAdc) | Not specified |
| Number of Channels | Common | 1 | Not specified |
| Open Circuit Voltage (OCV) | Common | 133–147 Vdc (typ. 140 Vdc) | Not specified |
| Output Current Day (Iout-Day) | Day | 142–158 mAdc (typ. 150 mAdc) | Not specified |
| Output Current NVIS (Iout-NVIS) | NVIS | 47–53 mAdc (typ. 50 mAdc) | Not specified |
| PCB Thickness | Common | 0.062 in | Not specified |
| Platform | Common | I-Drive5 Dual Mode | Not specified |
| RoHS Compliance | Common | Yes | Not specified |
| Size | Common | 3.250 X 2.0 X 0.470 inches | Not specified |
| Operating Temperature (Top) | Common | -30–85 °C | Not specified |
| Storage Temperature (Tstg) | Common | -40–105 °C | Not specified |
| Weight | Common | 35.7 g | Not specified |
Mechanical
- Envelope · L × W × H
- 3.25 × 2 × 0.47 in
- Weight
- 35.7 g
- PCB / foil thickness
- 0.062 in
- Mounting hole diameter
- 0.128 in
- Altitude
- 35000 ft
- Humidity
- 95.0
Connectors & pinouts
CON2
53261-0671
Product documents
Electrical conditions, connector pinouts and mechanical details.Designing around a specific panel?
Share your panel model and operating conditions.
Ask about compatibility →